New terenowa XTREME caravan trailer




























≈ €26,530
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts




















The XTREME OFF ROAD is a trailer for independent off-road use for days, regardless of civilization.
Trailer dimensions:
Dimensions in mm
Exterior ~ Interior
Width: 2,060 ~ 1,970
Height:
- Rear - 1,900 / 2,080 / 1,780
- Front 1,740 / 1,955 / 1,700
Length 3,800 + Rear slope 360 = 4,160 ~ 3,700 + Rear slope 330 = 3,700
STANDARD EQUIPMENT - D.A.C. CHASSIS
KNOTT Chassis
1. Two KNOTT braked axles - 2.7 t load capacity, located under the body
2. Coupling with travel brake, emergency travel brake, and parking brake
3. Ball hitch, height from the road: 450 mm. According to P.R.D.
4. Height-adjustable drawbar support wheel
5. Wheels: 185R14 C road - 5 pcs.
6. Rear parking support legs
D.A.C. Chassis
1. Reinforced ALU frame, suitable for OFF-ROAD use, black painted
2. ALU "V" drawbar with fixed coupling height. + -----II------
3. Painting, item 1, 2
4. Mud flaps + mud flaps - under the body
5. LED rear lights + license plate lights with electrical installation complete
STANDARD EQUIPMENT - D.A.C. BODY
4x4/Curve-resistant body
1. ISOTHERMAL - Side walls - ultralight, multi-layer self-supporting sandwich structure, thermally insulated with hardened polyurethane foam/styroform (no thermal bridges) with laminate/laminated skins
2. Thickness of walls, roof, and floor: approx. 40 mm - all-season body +40/-40 degrees C
3. Fixed roof with two front and rear aerodynamic angles, "breaks" as per photo no. 1.
4. Thermally insulated floor, PVC finish in a distressed oak plank pattern.
5. Reinforcements in the rear wall of the unit, for spare tire(s) and storage boxes.
6. Entrance door: 1 hinged door, clear width 600 mm. Located on the right wall, 0.7 m from the front/rear wall, locked with a stainless steel handle, opening from the outside and inside of the unit.
7. Cassettes, hinges - external strips - aluminum fittings
8. Wheels recessed into the floor, finished with aluminum sheet groove with insulation
Lighting:
9. Interior lighting: 2 LEDs + 2 movable reading lights 12V/24V
10. Sidelights - if regulations require a 12V electrical system
11. 13-pin plug
12. Electrical system 230V/12V
13. WEIGHING THE COMPLETE VEHICLE AFTER INSTALLATION
Notes:
15. STANDARD OF PERFORMANCE - D.A.C.
PRODUCT ANALOGY: BODYWORKS, INTERIOR EQUIPMENT, AND OTHER - see show contacts
16. After placing the Order, D.A.C. will present to the Ordering Party: Visualizations - vehicle interior design for approval.
17. All copyrights to the designs, patterns, and photos are reserved in accordance with the Intellectual and Related Rights Protection Act. Copying and using them in whole or in part without D.A.C.'s consent is prohibited by law. Legal basis: Journal of Laws 94, No. 24, item 83, corrigendum. Journal of Laws 94, No. 43, item 170.
18. EU Type Approval - Registration within the European Union
ADDITIONAL EQUIPMENT
BODY
1. Lower rear body slope approx. 35 x 35 cm
ELECTRICAL
2. Water heater: 10 L boiler + 4 gas grilles
3. 4 230 V sockets + 4 24 V sockets + 2 USB ports + standard socket "LIGHTER" 2 PCS.
4. 230V power cable, 25 m, on a winding drum.
WINDOWS
Thermal, raised on shock absorbers, with roller blind and mosquito net;
Left wall: 1 pc. 500 x 700 cm + right: 2 pcs. 500 x 799 cm
5. Hinged toilet window.
KITCHEN
• Integrated sink with two-burner gas stove, width 45 x length 60 cm
• Gas, carbon monoxide, fuel, and detergent sensors, voltage supplied by the camper's battery
• Sink faucet
14. Refrigerator + freezer, 80 L. 12V/230V compressor (no pull-out drawer)
INSTALLATIONS
15. 90L external drinking water tank, not thermally insulated + filler cap with key
16. 45L gray water tank, ------ II ------, not insulated + drain tap with flap
17. Drinking water supply pump
18. Drinking water and gray water installation
19. 12.5L gas cylinder + GAS with safety valve + level indicator
20. Plumbing and gas installation
FURNITURE
21. Detachable table - fixed
22. Sponge - seats + backrest with fabric upholstery, upper cabinets including sloping edges quilted in the color of the mosquito nets
23. Furniture: 9mm lightest hardwood plywood [as designed]
- Kitchen: lower + upper cabinets
- Main room: upper cabinets + lower cabinets
- Storage/seating/sleeping boxes for 2 people
- Bunk beds for 2 people
OPTIONS NOT SET FORTH:
• Front window with roller blind and awning for each bed (2 pcs. 400 x 2 pcs.)
• Anti-theft coupling lock preventing attachment to the car's towbar
• Anti-theft wheel lock with adaptation for AT tires
• Rear tailgate bike rack for 2 bikes
• Body paint or veneer with customization
• Antibacterial silver ion treatment for drinking water for 2 years
• External access flap to the ski box for 2 skis + 2 snowboards - right side
• 4 chairs + table - ultra-light, to fit in the front outer box + mounting hardware
• Electrical system connection to the car's alternator, complete with installation kit, with a drawbar plug - car
• Awning - 2.5 m long Width 2.0m, extendable with a crank
• Semi-matt black aluminum RYFEL box on the front drawbar (1 pc.) ~230L: 1250 x W525 x D500 mm
• Photovoltaic system: 200 W x 2 solar panels on the roof
Po Live 240 Ah battery inside the body with charging system:
Additional battery for camper and car.
from the sun / engine operation - alternator / from the 230V mains
Instrument panel:
• drinking water level, grey water level;
• battery charge: camper, car, 230V charging
• External LED lighting under the mosquito net cassette - two-point
• Roof window - electric fan; Main compartment air intake and exhaust system
• Tailgate - PANORAMA across the full width of the rear wall
• Spare wheel suspension bracket: 1 pc. suspension bolt under the body
• Parking supports
• Entrance door mosquito net
• INTERIOR TOILET:
Separate room, length 90 x depth 80 cm, with a 45 cm wide door
Shower
Shower tray or epoxy screed
THETFORD fixed toilet with water column and electric pump: suitcase-type waste cassette on wheels with handle
WC cassette access flap from outside the body
Corner washbasin with tap
Mirror cabinet
3-YEAR WARRANTY
EU APPROVAL
* This announcement is for commercial information only and does not constitute an offer under Art. 66, § 1.
Civil Code. The presented photos may differ from the presented version of the equipment.